On November 19, the National Medical Products Administration issued Announcement No. 42 of 2026.
In the 2026 national cosmetics sampling inspection, 18 batches of products were found to contain prohibited ingredients as stipulated in the Cosmetic Safety Technical Specification (2015 Edition). The product categories were widely spread—essence waters, masks, hair dyes, nail polish removers, and perfumes were all included.
Among them, 3 batches were found to contain the same substance: Lyral.
One detail is worth pondering. Among these three batches, the detected amount in perfume was 668 μg/g, in hand cream 16.11 μg/g, and in essence water 12.66 μg/g—a fifty-fold difference. The same prohibited ingredient, with such a vast difference in magnitude, indicates that they are not the same "way of making a mistake."
What is Lyral and why can't it be added?
Lyral, with the English trade name Lyral, chemical name hydroxyisohexyl 3-cyclohexene carboxaldehyde. It is a synthetic fragrance that smells like lily of the valley, with a fresh, sweet floral scent, good longevity, and stability. In the past, it was widely used in "floral bouquet" fragrances—lilac, hyacinth, lily of the valley and similar notes relied on it to enhance layering and persistence.
The problem lies in sensitization.
It is a known strong allergen; long-term or high-concentration exposure may cause contact dermatitis, redness, swelling, itching, and the like. Sensitization and irritation are not the same thing: irritation is immediate discomfort, and avoiding it is enough; sensitization is when the immune system remembers, and once sensitized, it is often lifelong—later, even a tiny contact may trigger a reaction.
Therefore, it was included in the prohibited components list of the Cosmetic Safety Technical Specification (2015 Edition).
Note the word "prohibited." It is different from "restricted"—restricted has a safe concentration limit, while prohibited has none; it must not be added. Detection means non-compliance, regardless of how low the amount.
The EU has taken the same path; Regulation (EU) 2017/1410 removed Lyral from the list of permitted fragrance substances.
How does a fragrance end up in the finished product?
This is what many brand owners cannot figure out: the formula sheet clearly does not list Lyral, so how was it detected?
The answer lies in the word "fragrance."
Fragrance is a mixture. A floral fragrance may contain dozens of individual components; the formula table often only lists "fragrance" or "PARFUM," and the subsequent list of components belongs to the fragrance house. The chain is like this: fragrance house compounds the fragrance → sells to OEM or brand → added to the bulk → filled into finished product.
As long as the fragrance side used Lyral, or used a compounded fragrance containing Lyral, no one along this chain can see it—until sampling inspection.
This also explains why the detected amounts differ fifty-fold. Perfume has a high proportion of fragrance, so the amount naturally goes up; essence water has only a few tenths of a percent of fragrance, so the amount is low. It is likely not a difference between "intentional addition" and "accidental," but rather different fragrance sources and different positions in the formula.
But regulations do not care whether it was intentional.

Which checks should the OEM factory perform?
Three checks, all can be documented.
First, the submission codes for fragrances and raw materials
Since the launch of the cosmetics raw material safety information registration platform, legitimate raw materials all have submission codes. Do not use fragrances that cannot obtain a submission code. This step may seem troublesome, but it clarifies the boundary of responsibility—who supplied the raw material, what specification, what safety information—all are recorded.
Second, consistency between the filed formula and the actual formula
The formula submitted for filing and the materials actually put into the workshop must be one set. Some problems are historical legacies: the formula was changed but the filing was not updated accordingly; or the fragrance supplier was changed, the composition changed, but the filing still lists the old one. Such inconsistencies are easily caught in sampling inspections.
Third, retained samples and traceability
This check usually shows no value, but when trouble occurs, everything relies on it. Which batch, which fragrance supplier was used, which lot number, who accepted it—can a complete chain be pulled out within two days? If not, the responsibility can only be borne by oneself.
By the way, for plant extracts, animal-derived raw materials, etc., traceability requirements are more detailed: origin certificates, extraction processes, and safety information submission codes must all be complete. The probability of problems with such raw materials may not be high, but once a problem occurs, missing documents are a hard flaw.

Frequently Asked Questions
Can Lyral be used in rinse-off products?
No. It is a prohibited component in China, regardless of leave-on or rinse-off, and must not be added. Some online claims mention "trace amounts allowed in rinse-off," but that is not the current regulation in China.
If the detected amount is very low, such as 12.66 μg/g, is it still considered non-compliant?
Yes. There is no safety threshold for prohibited ingredients; detection means non-compliance. This is precisely the fundamental difference between "prohibited" and "restricted."
How can brand owners conduct self-inspection?
Three things: request the raw material submission code for the fragrance from the OEM; verify that the filed formula matches the actual formula; and spot-check whether the retained sample records correspond to the batches.
If a fragrance contains prohibited ingredients, is it the responsibility of the fragrance house or the brand?
Legally, the registrant and filer bear the primary responsibility for product quality and safety, and the entrusted manufacturing enterprise is responsible for the production process. Therefore, the excuse "I didn't know the fragrance contained it" does not hold.
To be honest
Such announcements come in several batches every year. From the perspective of watching the excitement, it's "a certain brand has failed," but from the perspective of making products, it's another matter: in a chain, whoever has incomplete documents is easily pushed to the front.
For raw material compliance, the cost is not in testing fees, but in documentation. Submission codes, ingredient lists, retained sample records—normally they are just paper, but when trouble occurs, they are life.
In our years of doing OEM, what we fear is not high customer demands, but customers bringing a fragrance of unknown origin and saying, "This is cheap, use this." The cheap part is often the omitted documentation.