In the medical aesthetics repair category, sodium hyaluronate is indispensable. This ingredient is itself a natural substance in the skin, with good biocompatibility and strong moisturizing and repair capabilities, making it the main raw material for wound care after medical aesthetic procedures.
However, when many brand owners come to us to discuss ODM contract manufacturing, their understanding of sodium hyaluronate products is still stuck at "it's just a kind of mask." In reality, we alone hold 11 Class II medical device registration certificates related to sodium hyaluronate, covering 6 completely different product forms: masks, lyophilized flocculent, essence solutions, gels, lubricants, and care creams.
Today we will break down each one, explaining what the applicable scope of each product is, how the structural composition differs, and how to choose packaging and specifications — all based on the original data from the registration certificates, without exaggeration or fabrication.
I. Overview of the 11 Registered Certificate Products
1. Medical Sodium Hyaluronate Repair Solution (Emulsion)
Applicable scope: Used for the care of non-chronic wounds such as small wounds, abrasions, cuts (e.g., superficial wounds, first-degree or superficial second-degree burn and scald wounds, surgical suture wounds, wounds after laser/photon/fruit acid peel/microneedle minimally invasive cosmetic procedures) and the surrounding skin.
Structural composition: Composed of purified water, sodium hyaluronate, trehalose, glycerin, butylene glycol, p-hydroxyacetophenone, 1,2-hexanediol, and a volumetric flask. The volumetric flask materials include four types: glass bottles, plastic bottles, aluminum bottles, and borosilicate glass tubes.
Model specifications: All 4 packaging materials cover multiple specifications from 1mL to 500mL. Glass bottles target the high-end medical aesthetics channel, plastic bottles target the mass daily chemical line, aluminum bottles are used for binary spray, and borosilicate glass tubes are used for essence ampoules.
2. Medical Sodium Hyaluronate Repair Lyophilized Flocculent
Applicable scope: Used for the care of non-chronic wounds (such as superficial wounds, post-surgical suture wounds, mechanical trauma, small wounds, abrasions, cut wounds, first-degree or superficial second-degree burn and scald wounds, wounds after laser/photon/fruit acid peel/minimally invasive cosmetic procedures), providing a microenvironment for wound healing.
Structural composition: Composed of sodium hyaluronate lyophilized flocculent and purified water. Type I primary packaging is an aluminum foil bag (containing non-woven membrane), and Type II primary packaging is a glass bottle. The product is sterilized by irradiation and supplied sterile.
Model specifications: Aluminum foil bag (mask type) 10g-50g, glass bottle (essence type) 1g-200g. The lyophilized flocculent form is a highlight — the freeze-drying process locks in activity, and it is prepared fresh before use, giving consumers a strong hands-on experience.
3. Medical Sodium Hyaluronate Lubricant
Applicable scope: Used for lubrication when instruments enter natural body cavities, reducing friction between instruments and mucous membranes.
Structural composition: Composed of sodium hyaluronate, glycerin, and purified water. Primary packaging is a plastic bottle (with pump head). Supplied non-sterile. Model specifications: 5g-200g.
4. Medical Sodium Hyaluronate Care Cream
Applicable scope: Used for the care of non-chronic wounds and surrounding skin, providing a microenvironment for wound healing.
Structural composition: Composed of sodium hyaluronate, glycerin, carbomer, and purified water. Packaged in a tube (PE), 1g-200g. The product is sterilized by irradiation and supplied sterile.
5. Medical Sodium Hyaluronate Liquid Dressing
Applicable scope: Used for the care of non-chronic wounds such as small wounds, abrasions, cuts, and the surrounding skin, providing a physical barrier.
Structural composition: The liquid is composed of sodium hyaluronate, glycerin, carbomer, and purified water. Type I is a plastic bottle (with pump head), Type II is a pre-filled glass syringe, and Type III is a plastic tube. The product is sterilized by irradiation and supplied sterile.
Model specifications: Plastic bottle 5g-200g, pre-filled syringe 0.5g-10g, plastic tube 0.5g-10g. The pre-filled syringe dosage form is relatively scarce, with precise dosing and sterile ready-to-use convenience, which is highly favored in the hospital and medical aesthetics channel.
6-7. Medical Sodium Hyaluronate Gel (Two Registration Certificates)
With two registration certificates, the applicable scopes respectively cover wound care and absorption of wound exudate. Model specifications cover 6 packaging materials: tubes, glass bottles, plastic bottles, aluminum-plastic tubes, glass tubes, and plastic tubes, with full specification coverage from 0.5g to 500g.
8. Medical Sodium Hyaluronate Repair Dressing
Applicable scope: Used for the care of non-chronic wounds (such as superficial wounds, post-surgical suture wounds, mechanical trauma, small wounds, abrasions, cut wounds, first-degree or superficial second-degree burn and scald wounds, wounds after laser/photon/fruit acid peel/minimally invasive cosmetic procedures), providing a microenvironment for wound healing.
Structural composition: The liquid is composed of purified water, butylene glycol, glycerin, 1,2-hexanediol, xanthan gum, hydroxyethyl cellulose, sodium hyaluronate, trehalose, and p-hydroxyacetophenone. Type I consists of liquid and non-woven membrane (aluminum foil bag packaging), and Type II consists of liquid and a glass bottle. The product is sterilized by irradiation and supplied sterile.
Model specifications: Mask type (aluminum foil bag + non-woven membrane), membrane 3-30cm, liquid 1mL-50mL. This is the classic sodium hyaluronate mask form.
9. Medical Sodium Hyaluronate Repair Gel (Simplified Version)
Structural composition: Composed of water and sodium hyaluronate, an extremely simple formula. Containers are tubes, glass bottles, or glass tubes. 1g-155g. The advantage of the extremely simple formula is low irritation, suitable for post-procedure use on sensitive skin.
10. Medical Sodium Hyaluronate Repair Solution (Multi-Packaging Version)
Structural composition is identical to No. 1. 4 packaging materials (glass bottle, plastic bottle, aluminum bottle, borosilicate glass tube), full specifications from 1mL to 500mL.
11. Medical Sodium Hyaluronate Lyophilized Fiber
Applicable scope: Used for the care of non-chronic wounds, providing a microenvironment for wound healing.
Structural composition: The sodium hyaluronate lyophilized product is composed of sodium hyaluronate, trehalose, and mannitol. Type I consists of Bottle A (lyophilized product), Bottle B (purified water), and a spray pump; Type II is a bottled lyophilized product. All bottle packaging materials are glass bottles.
Model specifications: Type I (Bottle A + Bottle B + spray pump) Bottle A 10-80mg, Bottle B 4-32mL; Type II (lyophilized product) 10mg-200mg.
Lyophilized fiber is a very popular dosage form in the past two years — the combination of Bottle A lyophilized powder + Bottle B solvent allows consumers to mix it themselves, creating a strong sense of ritual, and the freeze-drying process preserves the activity of sodium hyaluronate.
II. Product Selection Reference for Brand Owners
Masks (aluminum foil bag + non-woven membrane) are suitable as e-commerce/medical aesthetics channel traffic-driving hero products; lyophilized powder/lyophilized fiber (Bottle A + Bottle B) with high unit price and high repurchase rate is suitable for medical aesthetics private domain; essence solutions/sprays (plastic bottles/aluminum bottles) are essential for all-channel daily skincare lines; gels (tubes/glass tubes) are a rigid need for post-procedure repair in medical aesthetics clinics; pre-filled syringes are a scarce dosage form with high barriers in hospitals and clinics.
III. About ODM Contract Manufacturing Cooperation
Weipeptide Group holds 100+ Class II medical device registration certificates, including 11 in the sodium hyaluronate series. We provide one-stop ODM services from formula customization, packaging material selection, filing and testing, to production and delivery. All products are manufactured strictly in accordance with the applicable scope and structural composition stated in the registration certificates, with compliance as the top priority. Payment terms: 50% advance payment + 50% payment upon delivery. Our factories are located in Guangzhou, Foshan, Ningxiang (Hunan), and Zhaoqing, with an annual production capacity of over 200 million pieces/tubes.
If you have product customization or private-label manufacturing needs, please consult us via the official website www.weitaigd.com.
